Hi
I am a 25 year old fully qualified elrctrician in the UK. I will be going over to aus soon on a 417 working holiday visa. Will I be able to do electrical work? Even if its working as a labourer under supervision? Just something to get my foot in the door to start withh as I only intend to work half the year and travel the rest :-) Any help will be much appreciated
TOPIC
UK electrician in aus
Discussion started on 17 Apr 2014
ID: #85
oldsparkle
Posted on
You may get lucky and pick up trades assistant work - not easy though even for those of us who have licenses to work under supervision.
oldsparkle
Posted on
The easiest way would be through South Australia.
When you get to Australia (anywhere) you would need to apply for any ARTC with Trades Recognition Australia. The initial cost for that is $930 - plus another $1000 if you have to do the Trades Test - info here http://www.innovation.gov.au/Skills/...s/default.aspx
If you are successful in getting an ARTC which has a minimum 90 day processing so you'll have to stay put once you've applied or get mail forwarded (or get PO box maybe), you bring it to South Australia and sign up to do wiring rules with Peer Veet -http://www.peer.com.au/Training/Upsk...8/Default.aspx which costs $830 plus books (another $700 ish if you can't get second hand copies) and takes a week and a half.
If you pass that, you take the cert and your ARTC and around $500 to the CBS office in Adelaide - http://www.cbs.sa.gov.au/wcm/licensi...-registration/ and they will send you out a license in a couple of weeks
Good guess is it might take around 6 months start to finish 🙂
When you get to Australia (anywhere) you would need to apply for any ARTC with Trades Recognition Australia. The initial cost for that is $930 - plus another $1000 if you have to do the Trades Test - info here http://www.innovation.gov.au/Skills/...s/default.aspx
If you are successful in getting an ARTC which has a minimum 90 day processing so you'll have to stay put once you've applied or get mail forwarded (or get PO box maybe), you bring it to South Australia and sign up to do wiring rules with Peer Veet -http://www.peer.com.au/Training/Upsk...8/Default.aspx which costs $830 plus books (another $700 ish if you can't get second hand copies) and takes a week and a half.
If you pass that, you take the cert and your ARTC and around $500 to the CBS office in Adelaide - http://www.cbs.sa.gov.au/wcm/licensi...-registration/ and they will send you out a license in a couple of weeks
Good guess is it might take around 6 months start to finish 🙂
GordonS
Posted on
Ah that's much easier to understand :-) thanks. Would it be wise to apply for the ARTC as soon as I get to Australia then? Get the ball rolling even if I go off travelling for a couple of months? I have friends who are residents in Melbourne and brisbane so I can use their address to receive mail. Is the only way to apply for the ARTC through that website?
oldsparkle
Posted on
You need to read the guidelines - the application is a bit full on from what I remember - and you need to make sure you have all the documents they need. If you go off travelling you need to be reachable as they may call you - or be able to return to do a practical assessment. You will also need to have something with an Australian address to add to the application I believe (been a while since I've read all the guidelines as OTSR holders cannot apply until OTSR conditions are met and then not really worth it)
If you are planning to do the 3 months regional work to stay 2 years, or if you are thinking about migrating permanently in the future, it's worth doing but otherwise I don't think I'd sink $3k or more on it
If you are planning to do the 3 months regional work to stay 2 years, or if you are thinking about migrating permanently in the future, it's worth doing but otherwise I don't think I'd sink $3k or more on it
oldsparkle
Posted on
Just to be clear - an ARTC will help you get an SA elec license. To work in other states you would need to apply for their license by mutual recognition - which can be easier in some states than others. If you later want to apply for independent PR you will still need to do OTSR with Vetassess or similar - and having an A class will mean you get a technical interview rather than practical assessment. OTSR's cost around $2500 I think. Visa application for single person is around $3500 plus medical / police checks but you can ask nearer the time
oldsparkle
Posted on
OTSR = Overseas Technical Skills Record which is what is needed for a PR skilled visa application
If you get the ARTC then SA elec license you can apply for other states by mutual recognition but not all states will want to accept an SA license as there is not period of supervised employment on this route. NSW has accepted applications this was - QLD will accept an NSW license on mutual rec and WA will accept a QLD license - or so I'm told. I'm still working on the SA one since I do have OTSR and not ARTC
If you get the ARTC then SA elec license you can apply for other states by mutual recognition but not all states will want to accept an SA license as there is not period of supervised employment on this route. NSW has accepted applications this was - QLD will accept an NSW license on mutual rec and WA will accept a QLD license - or so I'm told. I'm still working on the SA one since I do have OTSR and not ARTC
Related discussions
- Gaining WA A Grade Technical Licence 9 replies
- License ASAP why so hard 13 replies
- Advice needed on skills assessment with Vetassess 6 replies